Moisture measurement in sand with microwave technology
Microwave tube probe for moisture measurement in silos
Technical data
Output: 0-20 mA, 0-10 V
DC power supply: 15- 24 V DC
Measuring range: 0 - 20 % (depending on medium)
Measuring accuracy: +/- 0.3 % (depending on the medium)
Probe dimensions:
MS 150: diameter 55 mm, length 670 mm
MS 150 K: diameter 55 mm, length 400 mm
Holder dimensions:
WHT 130 x 120 x 140 mm
Microwave strip probe for moisture measurement on a strip
Output: 0-20 mA, 0-10 V DC Power supply: 15-24 V DC
Measuring range: 0 - 20 % (depending on medium)
Measuring accuracy: +/- 0.3 % (depending on the medium)
Probe dimensions:
MB 110: Length 360 mm
MB 110 K: Length 260 mm
Material height on belt: at least 60 mm
The MB 110 / MB 110 K microwave probe is also available with a hard metal coating for particularly abrasive materials.
Carbide measuring head available
Temperature display
Technical data
Technical data
Power supply: 15-24 V DC / output: 0-20 mA, 0-10 V DC
Measuring range: 0 - 20 % (depending on medium)
Measuring accuracy: +/- 0.3 % (depending on the medium)
Probe dimensions: Length from attachment 260 mm, total 500
For continuous determination of the moisture content in sand and aggregates
Nowadays, concrete quality is of crucial importance for the industrial production process. In order to fulfil the increasing quality requirements, it is essential to control and regulate the moisture content.
The BTS-5000 moisture analyser determines the moisture in the sand and aggregates quickly and accurately. It therefore forms the basis for correct dosing of the aggregates.
Improving the concrete quality
The advantage of moisture measurement lies in the significant improvement in concrete quality. The continuous measurement during the entire dosing process allows the moisture values to be determined and the production process to be continuously monitored in order to carry out an exact sand/water correction.
Application
All types of sand and aggregates up to a grain size of 8 mm can be measured.
Function
The BTS-5000 receives and processes the signals from the probe and converts them into moisture values. Moisture is measured directly in the bulk material flow, which means that the probe is simultaneously cleaned by the material flow.
Modular design
The modular design allows the moisture measurement to be expanded without any problems, as up to 4 measuring probes can be connected. The BTS-5000 can be integrated into any PLC or control system without additional software.
Technical data
Temperature range
The BTS-5000 can be operated in a temperature range from +1 to +50 °C.
Signal outputs
0-10 V DC, 0(4)-20 mA, RS232, RS485
Installation dimensions
Built-in housing WHT 160 x 120 x 50 mm
Front frame WD 170 x 130 x 4 mm
Power supply
230 V AC / 50/60 Hz, 115V AC / 60 Hz
BTH Portable sand moisture analyser
The new BTH is a portable moisture analyser for determining the moisture content in bulk materials such as sand, gravel and chippings. The BTH is characterised by precise measurement and user-friendly operation.
Features of the BTH moisture analyser:
- Large measuring range 0-30 %
- High reliability
- Easy to trigger, fast measuring process
- Ergonomically shaped measuring device
- Sturdy puncture probe with ergonomic handle
- Display with e-paper technology, easy to read even in direct sunlight
- Can be parameterised via USB interface and software
- More than 1000 measurements per battery charge
Simple operation
Insert the insertion probe into the material to be measured, press the Ø button and the measurement result is immediately shown on the display.
The BTH moisture measurement system consists of a robust penetration probe, an easy-to-operate display unit and a docking station for charging the device batteries.
Thanks to the low power consumption, the rechargeable batteries of the BTH device have a particularly long operating time.
Technical data
Device dimensions: 220 x 100 x 40 mm
Probe dimensions: 380 x 150 x 35 mm, insertion length: 260 mm
Docking station dimensions: 155 x 100 x 55 mm
Cable length: 1200 mm
Protection class: IP65
Power supply: 9V/1A plug-in power supply, 100-240 V, 50/60 Hz
Rechargeable batteries: 4 pieces, each 1.2V/2000mAH type NiMH, size AA
Resolution: 0.1%
Repeatability: +/- 0.3%
Standard interface: USB
Measuring curves: 6 pre-calibrated curves: 0-1, 0-2, 0-4, masonry sand, 4-8, 8-16
10 freely configurable curves
Why Bikotronic
Contact person
Im Hohen Acker 7
67146 Deidesheim
<a style="colour: #ffffffff;" href="mail:in**@bi********.en">info(at)bikotronic.de